Pigment and binder

CPVC, Pigment Oil Absorption and Binder Demand

Published by Morex Technologies ·

Critical pigment volume concentration (CPVC) is the PVC at which there is just enough binder to fill the spaces between densely packed pigment particles. Below CPVC the film is continuous; above it, voids appear and film properties change sharply.

Pigment oil absorption (OA)

Oil absorption is the amount of linseed oil needed to turn 100 g of pigment into a coherent paste. It is reported as grams of oil per 100 g of pigment and gives an indication of the vehicle demand of a pigment.

ASTM D281 measures it by spatula rub-out: oil is added drop by drop and worked in until a stiff, putty-like paste forms that does not break or separate. ASTM D1483 uses gentle stirring and folding instead of rubbing, so the two methods generally give different values. Always note which method a supplier’s OA value comes from.

Estimating CPVC from oil absorption

CPVC (%) = 100 ÷ (1 + OA × ρ ÷ 93.5)

SymbolMeaningUnit
OAOil absorption of the pigmentg oil / 100 g pigment
ρDensity of the pigmentg/cm³
93.5100 × density of linseed oil (0.935 g/cm³)—

The formula treats the oil needed to wet the pigment as the binder volume at the critical point. For a pigment with OA 18 and density 4.10 g/cm³: CPVC = 100 ÷ (1 + 18 × 4.10 ÷ 93.5) = 55.89 %.

For a blend of pigments, work in volumes rather than averaging OA and density: CPVC = Vp ÷ (Vp + V_oil) × 100, where Vp is the total pigment volume and V_oil = Σ(OAᵢ × wᵢ ÷ 100) ÷ 0.935. For a single pigment this gives the same result as the formula above.

Worked example for a pigment blend

Pigments from the illustrative formulation (OA values illustrative)
PigmentWeight (g)Density (g/cm³)OA (g/100 g)Volume (cm³)Oil (g)
Titanium dioxide204.10184.8783.6
Calcium carbonate152.70205.5563.0
Total35Vp = 10.4346.6

V_oil = 6.6 ÷ 0.935 = 7.059 cm³. CPVC = 10.434 ÷ (10.434 + 7.059) × 100 = 59.65 %. The formulation’s PVC is 44.44 %, so the reduced PVC (Λ = PVC ÷ CPVC) is 0.745 — comfortably below the critical point.

Example values are illustrative, chosen to show the arithmetic. Use the density, solids and oil absorption from your own raw materials’ technical data sheets.

Binder demand

Binder demand describes how much binder a pigment blend needs to wet its surface and fill the spaces between particles. When it is estimated from oil absorption, it is the oil demand of the blend: 6.6 g of oil per 35 g of pigment in the example, or 18.9 g per 100 g of pigment. Terminology varies between companies, so state the basis you use.

Oil demand is only an indicator. Real resins wet pigments differently from linseed oil, so the binder a formulation actually needs must be confirmed in the lab.

Why calculated CPVC is an estimate

  • The OA value must come from a well-dispersed, non-flocculated pigment; flocculation changes packing.
  • Resins wet pigments differently from linseed oil, and particle size and shape affect packing.
  • Blends of fine and coarse particles can pack more densely than either alone.
  • For these reasons CPVC is properly determined in the laboratory, by making films at a series of PVC levels and finding where a property such as porosity, gloss or scrub resistance changes sharply.

What happens when PVC exceeds CPVC

Above CPVC there is not enough binder to fill the spaces between pigment particles, so the film contains air voids. Porosity rises, and scrub resistance, stain resistance and gloss typically fall. Hiding can increase because of the air voids, which is why some flat interior paints are deliberately formulated close to or above CPVC.

Common calculation mistakes

  • Averaging OA and density by weight for a blend instead of working with volumes.
  • Mixing OA values from different test methods (D281 rub-out and D1483 stirring).
  • Treating a calculated CPVC as exact instead of an estimate to be confirmed in the lab.
  • Comparing PVC with CPVC when PVC includes only some of the pigments.

Frequently asked questions

What is the difference between PVC and CPVC?

PVC is the actual pigment volume concentration of a formulation. CPVC is the particular PVC at which binder just fills the spaces between packed pigment particles. Their ratio, Λ = PVC ÷ CPVC, shows how close a paint is to the critical point.

How do I estimate CPVC using pigment oil absorption values?

For one pigment, CPVC (%) = 100 ÷ (1 + OA × density ÷ 93.5). For a blend, divide the total pigment volume by the pigment volume plus the oil volume (total oil mass ÷ 0.935).

Why is CPVC marked as estimated in a formulation calculation?

Because the oil-absorption method only approximates how a real binder wets and packs the pigments. A laboratory determination is needed for a definitive value.

How is oil absorption of a pigment measured?

By adding linseed oil to a weighed pigment until a stiff paste forms, using ASTM D281 (spatula rub-out) or ASTM D1483 (gentle stirring). Results are in grams of oil per 100 g of pigment.

How does CPVC affect porosity and scrub resistance?

Above CPVC, voids form in the film, so porosity rises and scrub resistance usually falls.

Calculating this in PaintOS

PaintOS calculates total volume, SVR, NVW, VMC, PVC and an estimated CPVC from the density, solids, solid density and oil absorption stored for each raw material, and recalculates them as a formulation changes.

Learn about PaintOS formulation management →

Related formulation guides